**Articles and Citations (Google Scholar)**

**Citing Articles Map (Thomson Reuters)**

**Books**

- Elvin, N. and Erturk, A. (editors), 2013, Advances in Energy Harvesting Methods, Springer, New York (455pp).
- Erturk, A.and Inman, D.J., 2011, Piezoelectric Energy Harvesting, Wiley, Chichester, UK (392pp).

**Book Chapters**

- Erturk, A., 2015, “Macro-Fiber Composite Actuated Piezoelectric Robotic Fish,” Chapter 9 in Robot Fish: Bio-Inspired Fishlike Underwater Robots, pp. 255-283, Springer, New York (Eds. Du, R., Li, Z., Youcef-Toumi, K., and Valdivia y Alvarado, P).
- De Marqui, Jr., C. and Erturk, A., 2013, “Airfoil-based Linear and Nonlinear Electroaeroelastic Energy Harvesting,” Chapter 11 in Advances in Energy Harvesting Methods, pp. 269-294, Springer, New York (Eds. Elvin, N. and Erturk, A.).
- Elvin, N. and Erturk, A., 2013, “Introduction and Methods of Mechanical Energy Harvesting,” Chapter 1 in Advances in Energy Harvesting Methods, pp. 3-14, Springer, New York (Eds. Elvin, N. and Erturk, A.).
- Erturk, A. and Inman, D.J., 2009, “Electromechanical Modeling of Cantilevered Piezoelectric Energy Harvesters for Persistent Base Motions,” Chapter 2 in Energy Harvesting Technologies, pp. 41-77, Springer, New York (Eds. Priya, S. and Inman, D.J.).

**Journal Publications**

(pdf copies are provided for personal use only – copyrighted material)

- Silva, T., Clementino, M., De Marqui, Jr., and Erturk, A., 2018, “An Experimentally Validated Piezoelectric Nonlinear Energy Sink for Wideband Vibration Attenuation,” Journal of Sound and Vibration, under revision.
- Sousa, V.C., Sugino, C., De Marqui, Jr., C., and Erturk, A., 2018, “Adaptive Locally Resonant Metamaterials Leveraging Shape Memory Alloys,” Journal of Applied Mechanics, under revision.
- Silva, T., Clementino, M., De Marqui, Jr., and Erturk, A., 2018, “Equivalent Electrical Circuit Framework for Nonlinear and High Quality Factor Piezoelectric Structures,” Mechatronics, under revision.
- Sugino, C., Ruzzene, M., and Erturk, A., 2018, “Design and Analysis of Piezoelectric Metamaterial Beams with Synthetic Impedance Shunt Circuits,” IEEE/ASME Transactions on Mechatronics, under revision.
- Silva, T., Tan, D., De Marqui, Jr., and Erturk, A., 2018, “Vibration Attenuation in Nonlinear Flexible Structures Using Nonlinear Switching Circuits and Energy Harvesting Implications,” Mechanical Systems and Signal Processing (special issue), under revision.
- De Marqui, Jr., Tan, D., and Erturk, A., 2018, “On the Electrode Segmentation for Piezoelectric Energy Harvesting from Nonlinear Limit Cycle Oscillations in Axial Flow,” Journal of Fluids and Structures, under revision.
- Trainiti, G., Xia, Y., Marconi, J., Erturk, A., and Ruzzene, M., 2018, “Time-Periodic Stiffness Modulation in Elastic Metamaterials for Selective Wave Filtering: Theory and Experimental Investigations,” arxiv version.
- Sugino, C., Ruzzene, M., and Erturk, A., 2018, “Merging Mechanical and Electromechanical Bandgaps in Locally Resonant Metamaterials and Metastructures,” Journal of the Mechanics and Physics of Solids,
**116,**pp. 323-333 (copyright by Elsevier). - Sugino, C. and Erturk, A., 2018, “Analysis of Multifunctional Piezoelectric Metastructures for Low-Frequency Bandgap Formation and Energy Harvesting,” Journal of Physics D: Applied Physics,
**51,**215103 (11pp) (copyright by IOP). - Tan, D., Yavarow, P., and Erturk, A., 2018, “Resonant Nonlinearities of Macro-Fiber Composite Cantilevers with Interdigitated Electrodes in Energy Harvesting,” Nonlinear Dynamics,
**92,**pp. 1935-1945 (copyright by Springer). - Shahab, S., Zhao, S., and Erturk, A., 2018, “Soft and Hard Piezoelectric Ceramics and Single Crystals for Random Vibration Energy Harvesting,” Energy Technology,
**6**, pp. 935-942 (Special Issue on Ferroelectric Devices for Energy Harvesting and Storage) (copyright by Wiley). - Tan, D., Yavarow, P., and Erturk, A., 2018, “Nonlinear Elastodynamics of Piezoelectric Macro-Fiber Composites with Interdigitated Electrodes for Resonant Actuation,” Composite Structures,
**187,**pp. 137-143 (copyright by Elsevier). - Kathpalia, B., Tan, D., Stern, I., and Erturk, A., 2018, “An Experimentally Validated Model for Geometrically Nonlinear Plucking-based Frequency-up Conversion in Energy Harvesting,” Smart Materials and Structures,
**27,**015024 (9pp) (copyright by IOP). - Tol, S., Degertekin, F.L., and Erturk, A., 2017, “Structurally-Embedded Reflectors and Mirrors for Elastic Wave Focusing and Energy Harvesting,” Journal of Applied Physics,
**122,**164503 (copyright by AIP). - Sugino, C., Xia, Y., Leadenham, S., Ruzzene, M., and Erturk, A., 2017, “A General Theory for Bandgap Estimation in Locally Resonant Metastructures,” Journal of Sound and Vibration,
**406**, pp. 104-123 (copyright by Elsevier). - Tol, S., Degertekin, F.L., and Erturk, A., 2017, “Phononic Crystal Luneburg Lens for Omnidirectional Elastic Wave Focusing and Energy Harvesting,” Applied Physics Letters,
**111**, 013503 (5pp) (copyright by AIP). - Yang, Z., Erturk, A., and Zu, J., 2017, “On the Efficiency of Piezoelectric Energy Harvesters,” Extreme Mechanics Letters,
**15,**pp. 26-37 (copyright by Elsevier). - Tol, S., Xia, Y., Ruzzene, M., and Erturk, A., 2017, “Self-Bending Elastic Waves and Obstacle Circumventing in Wireless Power Transfer,” Applied Physics Letters,
**110**,163505 (5pp) (copyright by AIP). - Sugino, C., Leadenham, S., Ruzzene, M., and Erturk, A., 2017, “An Investigation of Electroelastic Bandgap Formation in Locally Resonant Piezoelectric Metastructures,” Smart Materials and Structures,
**26,**055029 (11pp) (copyright by IOP). - Moura, A.G. and Erturk, A., 2017, “Electroelastodynamics of Flexoelectric Energy Conversion and Harvesting in Elastic Dielectrics,” Journal of Applied Physics,
**121**, 064110 (12pp) (copyright by AIP). - Shahab, S. and Erturk, A., 2017, “Coupling of Experimentally Validated Electroelastic Dynamics and Mixing Rules Formulation for Macro-Fiber Composite Piezoelectric Structures,” Journal of Intelligent Material Systems and Structures,
**28,**pp. 1575–1588 (copyright by SAGE). - Sugino, C., Leadenham, S., Ruzzene, M., and Erturk, A., 2016, “On the Mechanism of Bandgap Formation in Locally Resonant Finite Elastic Metamaterials,” Journal of Applied Physics,
**120**, 134501 (7pp) (copyright by AIP). - Tol, S., Degertekin, F.L., and Erturk, A., 2016, “Gradient-Index Phononic Crystal Lens-based Enhancement of Elastic Wave Energy Harvesting,” Applied Physics Letters,
**109,**063902 (5pp) (copyright by AIP) (**ASME Energy Harvesting Best Paper Award**). - Shahab, S. and Erturk, A., 2016, “Electrohydroelastic Euler-Bernoulli-Morison Model for Underwater Resonant Actuation of Macro-Fiber Composite Cantilevers,” Smart Materials and Structures,
**25,**105007 (15pp) (copyright by IOP). - Aridogan, U., Basdogan, I., and Erturk, A., 2016, “Random Vibration Energy Harvesting on Thin Plates Using Multiple Piezopatches,” Journal of Intelligent Material Systems and Structures,
**27**, pp. 2744-2756 (copyright by SAGE). - Tol, S., Degertekin, F.L., and Erturk, A., 2016, “Piezoelectric Power Extraction from Bending Waves: Electroelastic Modeling, Experimental Validation, and Performance Enhancement,” Wave Motion,
**60**, pp. 20-34 (copyright by Elsevier). - Bayik, B., Aghakhani, A., Basdogan, I., and Erturk, A., 2016, “Equivalent Circuit Modeling of a Piezo-Patch Energy Harvester on a Thin Plate with AC-DC Conversion,” Smart Materials and Structures,
**25**, 055015 (10pp) (copyright by IOP). - Shahab, S., Tan, D., and Erturk, A., 2015, “Hydrodynamic Thrust Generation and Power Consumption Investigations for Piezoelectric Fins with Different Aspect Ratios,” European Physical Journal – Special Topics,
**224**, pp. 3419-3434 (Special Issue on Dynamics of Animal Systems) (copyright by Springer). - Cao, D., Leadenham, S., and Erturk, A., 2015, “Internal Resonance for Nonlinear Vibration Energy Harvesting,” European Physical Journal – Special Topics,
**224**, pp. 2867-2880 (Special Issue on Nonlinear and Multiscale Dynamics of Smart Materials in Energy Harvesting ) (copyright by Springer). - Leadenham, S. and Erturk, A., 2015, “Nonlinear M-Shaped Broadband Piezoelectric Energy Harvester for Very Low Base Accelerations: Primary and Secondary Resonances,” Smart Materials and Structures,
**24**, 055021 (14pp)**featured article**(copyright by IOP). - Shahab, S., Gray, M., and Erturk, A., 2015, “Ultrasonic Power Transfer from a Spherical Acoustic Wave Source to a Free-Free Piezoelectric Receiver: Modeling and Experiment,” Journal of Applied Physics,
**117**, 104903 (8pp) (copyright by AIP). - Carrara, M., Kulpe, J., Leadenham, S., Leamy, M.J., and Erturk, A., 2015, “Fourier Transform-based Design of a Patterned Piezoelectric Energy Harvester Integrated with an Elastoacoustic Mirror,” Applied Physics Letters,
**106**, 013907 (4pp) (copyright by AIP). - Leadenham, S. and Erturk, A., 2015, “Unified Nonlinear Electroelastic Dynamics of a Bimorph Piezoelectric Cantilever for Energy Harvesting, Sensing, and Actuation,” Nonlinear Dynamics,
**79**, pp. 1727-1743 (copyright by Springer). - Dias, J.A.C., De Marqui, Jr., C., and Erturk, A., 2015, “Three-Degree-of-Freedom Hybrid Piezoelectric-Inductive Aeroelastic Energy Harvester Exploiting a Control Surface,” AIAA Journal,
**53**, pp. 394-404 (copyright by AIAA). - Shahab, S. and Erturk, A., 2014, “Contactless Ultrasonic Energy Transfer for Wireless Systems: Acoustic-Piezoelectric Structure Interaction Modeling and Performance Enhancement,” Smart Materials and Structures,
**23**, 125032 (13pp) (copyright by IOP). - Aridogan, U., Basdogan, I., and Erturk, A., 2014, “Multiple Patch-based Broadband Piezoelectric Energy Harvesting on Plate-based Structures,” Journal of Intelligent Material Systems and Structures,
**25**, pp. 1664-1680 (copyright by SAGE). - Leadenham, S. and Erturk, A., 2014, “M-Shaped Asymmetric Nonlinear Oscillator for Broadband Vibration Energy Harvesting: Harmonic Balance Analysis and Experimental Validation,” Journal of Sound and Vibration,
**333**, pp. 6209-6223 (copyright by Elsevier). - Skow, E.A., Cunefare, K.A., and Erturk, A., 2014, “Power Performance Improvements for High Pressure Ripple Energy Harvesting,” Smart Materials and Structures,
**23**, 104011 (7pp) (copyright by IOP). - Anton, S.R., Farinholt, K.M., and Erturk, A., 2014, “Piezoelectret Foam-based Vibration Energy Harvesting,” Journal of Intelligent Material Systems and Structures,
**25**, pp. 1681-1692 (copyright by SAGE). - Deng, Q., Kammoun, M., Erturk, A., and Sharma, P., 2014, “Nanoscale Flexoelectric Energy Harvesting,” International Journal of Solids and Structures,
**51**, pp. 3218-3225 (copyright by Elsevier) (**ASME Energy Harvesting Best Paper Award**). - Zhao, S. and Erturk, A., 2014, “Deterministic and Band-Limited Stochastic Energy Harvesting from Uniaxial Excitation of a Multilayer Piezoelectric Stack,” Sensors and Actuators A: Physical,
**214**, pp. 58-65 (copyright by Elsevier). - Aridogan, U., Basdogan, I., and Erturk, A., 2014, “Analytical Modeling and Experimental Validation of a Structurally-Integrated Piezoelectric Energy Harvester on a Thin Plate,” Smart Materials and Structures,
**23**, 045039 (13pp) (copyright by IOP). - Daqaq, M.F., Masana, R., Erturk, A., and Quinn, D.D., 2014, “Closure to “Discussion of ‘On the Role of Nonlinearities in Vibratory Energy Harvesting: A Critical Review and Discussion'”,” ASME Applied Mechanics Reviews,
**66**, 046001 (1p) - Daqaq, M.F., Masana, R., Erturk, A., and Quinn, D.D., 2014, “On the Role of Nonlinearities in Vibratory Energy Harvesting: A Critical Review and Discussion,” ASME Applied Mechanics Reviews,
**66**, 040801 (23pp) - Zhou, S., Cao, J., Erturk, A., and Lin, J. 2013, “Enhanced Broadband Piezoelectric Energy Harvesting Using Rotatable Magnets,” Applied Physics Letters,
**102**, 173901 (4pp) (copyright by AIP). - Carrara, M., Cacan, M.R., Toussaint, J., Leamy, M.J., Ruzzene, M., and Erturk, A., 2013, “Metamaterial-Inspired Structures and Concepts for Elastoacoustic Wave Energy Harvesting,” Smart Materials and Structures,
**22**, 065004 (8pp)**featured article**(copyright by IOP). - Zhao, S. and Erturk, A., 2013, “On the Stochastic Excitation of Monostable and Bistable Electroelastic Power Generators: Relative Advantages and Tradeoffs in a Physical System,” Applied Physics Letters,
**102**, 103902 (4pp) (copyright by AIP). - Dias, J.A.C., De Marqui, Jr., C., and Erturk, A., 2013, “Hybrid Piezoelectric-Inductive Flow Energy Harvesting and Dimensionless Electroaeroelastic Analysis for Scaling,” Applied Physics Letters,
**102**, 044101 (5pp) (copyright by AIP). - Cunefare, K.A., Skow, E.A., Erturk, A., Savor, J., Verma, N., and Cacan, M.R., 2013, “Energy Harvesting from Hydraulic Pressure Fluctuations,” Smart Materials and Structures,
**22**, 025036 (10pp) (copyright by IOP). - Cen, L. and Erturk, A., 2013, “Bio-Inspired Aquatic Robotics by Untethered Piezohydroelastic Actuation,” Bioinspiration and Biomimetics,
**8**, 016006 (13pp) (copyright by IOP). - De Marqui, Jr., C. and Erturk, A., 2013, “Electroaeroelastic Analysis of Airfoil-based Wind Energy Harvesting Using Piezoelectric Transduction and Electromagnetic Induction,” Journal of Intelligent Material Systems and Structures,
**24**, pp. 846-854 (copyright by SAGE). - Zhao, S. and Erturk, A., 2013, “Electroelastic Modeling and Experimental Validations of Piezoelectric Energy Harvesting from Broadband Random Vibrations of Cantilevered Bimorphs,” Smart Materials and Structures,
**22**, 015002 (14pp)**featured article**(copyright by IOP). - Carrara, M., Cacan, M.R., Leamy, M.J., Ruzzene, M., and Erturk, A., 2012, “Dramatic Enhancement of Structure-borne Wave Energy Harvesting Using an Elliptical Acoustic Mirror,” Applied Physics Letters,
**100**, 204105 (4pp) (copyright by AIP). - Erturk, A., 2012, “Assumed-modes Modeling of Piezoelectric Energy Harvesters: Euler-Bernoulli, Rayleigh, and Timoshenko Models with Axial Deformations,” Computers and Structures,
**106**, pp. 214-227 (copyright by Elsevier). - Anton, S.R., Erturk, A., and Inman, D.J., 2012, “Bending Strength of Piezoelectric Ceramics and Single Crystals for Multifunctional Load-Bearing Applications,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control,
**59**, pp. 1085-1092 (copyright by IEEE). - Stanton, S.C., Erturk, A., Mann, B.P., Dowell, E.H., and Inman, D.J., 2012, “Nonlinear Nonconservative Behavior and Modeling of Piezoelectric Energy Harvesters Including Proof Mass Effects,” Journal of Intelligent Material Systems and Structures,
**23**, pp. 183-199 (copyright by SAGE). - Anton, S.R., Erturk, A., and Inman, D.J., 2012, “Multifunctional Unmanned Aerial Vehicle Wing Spar for Low-Power Generation and Storage,” AIAA Journal of Aircraft,
**49**, pp. 292-301 (copyright by AIAA). - Gambier, P., Anton, S.R., Kong, N., Erturk, A., and Inman, D.J., 2012, “Piezoelectric, Solar and Thermal Energy Harvesting for Hybrid Low-Power Generator Systems with Thin-Film Batteries,” Measurement Science and Technology,
**23**, 015101 (11pp) (copyright by IOP). - Erturk, A. and Delporte, G., 2011, “Underwater Thrust and Power Generation Using Flexible Piezoelectric Composites: An Experimental Investigation Toward Self-Powered Swimmer-Sensor Platforms,” Smart Materials and Structures,
**20**, 125013 (11pp) (copyright by IOP). - Erturk, A., 2011, “Piezoelectric Energy Harvesting for Civil Infrastructure System Applications: Moving Loads and Surface Strain Fluctuations,” Journal of Intelligent Material Systems and Structures,
**22**, pp. 1958-1972 (copyright by SAGE). - Sousa, V.C., Anicézio, M., De Marqui, Jr., C., and Erturk, A., 2011, “Enhanced Aeroelastic Energy Harvesting by Exploiting Combined Nonlinearities: Theory and Experiment,” Smart Materials and Structures,
**20**, 094007 (8pp) (copyright by IOP). - Erturk, A. and Inman, D.J., 2011, “Broadband Piezoelectric Power Generation on High-Energy Orbits of the Bistable Duffing Oscillator with Electromechanical Coupling,” Journal of Sound and Vibration,
**330**, pp. 2339-2353 (copyright by Elsevier). - De Marqui, Jr., C., Vieira, W.G.R., Erturk, A., and Inman, D.J., 2011, “Modeling and Analysis of Piezoelectric Energy Harvesting from Aeroelastic Vibrations Using the Doublet-Lattice Method,” ASME Journal of Vibration and Acoustics,
**133**, 011003 (9pp) (copyright by ASME). - Erturk, A. and Inman, D.J., 2011, “Parameter Identification and Optimization in Piezoelectric Energy Harvesting: Analytical Relations, Asymptotic Analyses and Experimental Validations,” IMechE Journal of Systems and Control Engineering,
**225**, pp. 485-496 (copyright by SAGE). - Stanton, S.C., Erturk, A., Mann, B.P., and Inman, D.J., 2010, “Resonant Manifestation of Intrinsic Nonlinearity within Electroelastic Micropower Generators,” Applied Physics Letters,
**97**, 254101 (3pp) (copyright by AIP). - Anton, S.R., Erturk, A., and Inman, D.J., 2010, “Multifunctional Self-Charging Structures using Piezoceramics and Thin-Film Batteries,” Smart Materials and Structures,
**19**, 115021 (15pp) (copyright by IOP). - Stanton, S.C., Erturk, A., Mann, B.P., and Inman, D.J., 2010, “Nonlinear Piezoelectricity in Electroelastic Energy Harvesters: Modeling and Experimental Identification,” Journal of Applied Physics,
**108**, 074903 (9pp) (copyright by AIP). - Kong, N., Ha, D.S., Erturk, A., and Inman, D.J., 2010, “Resistive Impedance Matching Circuit for Piezoelectric Energy Harvesting,” Journal of Intelligent Material Systems and Structures,
**21**, pp. 1293-1302 (copyright by SAGE). - Arrieta, A.F., Hagedorn, P., Erturk, A., and Inman, D.J., 2010, “A Piezoelectric Bistable Plate for Nonlinear Broadband Energy Harvesting,” Applied Physics Letters,
**97**, 104102 (3pp) (copyright by AIP). - Bilgen, O., Erturk, A., and Inman, D.J., 2010, “Analytical and Experimental Characterization of Macro-Fiber Composite Actuated Thin Clamped-Free Unimorph Benders,” ASME Journal of Vibration and Acoustics,
**132**, 051005 (6pp) (copyright by ASME). - Erturk, A., Vieira, W.G.R., De Marqui, Jr., C., and Inman, D.J., 2010, “On the Energy Harvesting Potential of Piezoaeroelastic Systems,” Applied Physics Letters,
**96**, 184103 (3pp) (copyright by AIP). - De Marqui, Jr., C., Erturk, A., and Inman, D.J., 2010, “Piezoaeroelastic Modeling and Analysis of a Generator with Continuous and Segmented Electrodes,” Journal of Intelligent Material Systems and Structures,
**21**, pp. 983-993 (copyright by SAGE). - Erturk, A., Hoffmann, J., and Inman, D.J., 2009, “A Piezomagnetoelastic Structure for Broadband Vibration Energy Harvesting,” Applied Physics Letters,
**94**, 254102 (3pp)**featured article**(copyright by AIP). - Erturk, A.and Inman, D.J., 2009, “An Experimentally Validated Bimorph Cantilever Model for Piezoelectric Energy Harvesting from Base Excitations,” Smart Materials and Structures,
**18**, 025009 (18pp)**most cited article in 2010-2011**(copyright by IOP). - Erturk, A., Renno, J.M., and Inman, D.J., 2009, “Modeling of Piezoelectric Energy Harvesting from an L-Shaped Beam-Mass Structure with an Application to UAVs,” Journal of Intelligent Material Systems and Structures,
**20**, pp. 529-544 (copyright by SAGE). - Erturk, A., Tarazaga, P.A., Farmer, J.R., and Inman, D.J., 2009, “Effect of Strain Nodes and Electrode Configuration on Piezoelectric Energy Harvesting from Cantilevered Beams,” ASME Journal of Vibration and Acoustics,
**131**, 011010 (11pp) (copyright by ASME). - De Marqui, Jr., C., Erturk, A., and Inman, D.J., 2009, “An Electromechanical Finite Element Model for Piezoelectric Energy Harvester Plates, Journal of Sound and Vibration,”
**327**, pp. 9-25 (copyright by Elsevier). - Ozsahin, O., Erturk, A., Ozguven H.N., and Budak, E., 2009, “A Closed-Form Approach for Identification of Dynamical Contact Parameters in Spindle-Holder-Tool Assemblies,” International Journal of Machine Tools and Manufacture,
**49**, pp. 25-35 (copyright by Elsevier). - Erturk, A., Bilgen, O., and Inman, D.J., 2008, “Power Generation and Shunt Damping Performance of a Single Crystal Lead Magnesium Niobate – Lead Zirconate Titanate Unimorph: Analysis and Experiment,” Applied Physics Letters,
**93**, 224102 (3pp) (copyright by AIP). - Erturk, A.and Inman, D.J., 2008, “Issues in Mathematical Modeling of Piezoelectric Energy Harvesters,” Smart Materials and Structures,
**17**, 065016 (14pp)**second most cited article in 2010-2011**(copyright by IOP). - Erturk, A. and Inman, D.J., 2008, “A Distributed Parameter Electromechanical Model for Cantilevered Piezoelectric Energy Harvesters,” ASME Journal of Vibration and Acoustics,
**130**, 041002 (15pp) (copyright by ASME). - Erturk, A.and Inman, D.J., 2008, “On Mechanical Modeling of Cantilevered Piezoelectric Vibration Energy Harvesters,” Journal of Intelligent Material Systems and Structures,
**19**, pp. 1311-1325 (copyright by SAGE). - Erturk, A. and Inman, D.J., 2007, “On the Fundamental Transverse Vibration Frequency of a Free-Free Thin Beam with Identical End Masses,” ASME Journal of Vibration and Acoustics,
**129**, pp. 656-662 (copyright by ASME). - Erturk, A., Budak, E., and Ozguven H.N., 2007, “Selection of Design and Operational Parameters in Spindle-Holder-Tool Assemblies for Maximum Chatter Stability by Using a New Analytical Model,” International Journal of Machine Tools and Manufacture,
**47**, pp. 1401-1409 (copyright by Elsevier). - Erturk, A., Ozguven, H.N., and Budak, E., 2007, “Effect Analysis of Bearing and Interface Dynamics on Tool Point FRF for Chatter Stability in Machine Tools by using a New Analytical Model for Spindle-Tool Assemblies,” International Journal of Machine Tools and Manufacture,
**47**, pp. 23-32 (copyright by Elsevier). - Budak, E., Erturk, A., and Ozguven, H.N., 2006, “A Modeling Approach for Analysis and Improvement of Spindle-Holder-Tool Assembly Dynamics,” CIRP Annals – Manufacturing Technology,
**55**, pp. 369-372 (copyright by CIRP). - Erturk, A., Ozguven, H.N., and Budak, E., 2006, “Analytical Modeling of Spindle-Tool Dynamics on Machine Tools using Timoshenko Beam Model and Receptance Coupling for the Prediction of Tool Point FRF,” International Journal of Machine Tools and Manufacture,
**46**, pp. 1901-1912 (copyright by Elsevier).

**Conference Proceedings**

- Xia, Y., Ruzzene, M., and Erturk, A., 2018, “Selective Wave Filtering In Time-Modulated Elastic Metamaterials,” Proceedings of the ASME 2018 IDETC 30
^{th}Biennial Conference on Mechanical Vibration and Noise, Quebec City, Quebec, Canada, 26-29 August 2018. - Sugino, C., Ruzzene, M., and Erturk, A., 2018, “Dispersion Tailoring in Varying-Inductance Piezoelectric Metamaterials,” Proceedings of the 25
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Denver, CO, 4-8 March 2018. - Tan, D. and Erturk, A., 2018, “On the Coupling of Nonlinear Macro-Fiber Composite Piezoelectric Cantilever Dynamics with Hydrodynamic Loads,” Proceedings of the 25
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Denver, CO, 4-8 March 2018. - Silva, T., Clementino, M., De Marqui, Jr., C., and Erturk, A., 2018, “Effects of a Piezoelectric Based Nonlinear Energy Sink on the Behavior of an Electromechanically Coupled Beam,” Proceedings of the 25th SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Denver, CO, 4-8 March 2018.
- Moura, A. and Erturk, A., 2018, “Varying Cross-Section and Axial Strain-Gradient Effects in Flexoelectric Cantilevers at Submicron Thickness Levels,” Proceedings of the 25
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Denver, CO, 4-8 March 2018. - Sousa, V., Sugino, C., De Marqui, Jr., C., and Erturk, A., 2018, “Locally Resonant Metamaterials with Shape-Memory Alloy Springs,” Proceedings of the 25
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Denver, CO, 4-8 March 2018. - Sugino, C., Ruzzene, M., and Erturk, A., 2017, “Dynamics of Hybrid Mechanical-Electromechanical Locally Resonant Metastructures,” Proceedings of the 10
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, 18-20 September 2017. - Tan, D., Yavarow, P., and Erturk, A., 2017, “Resonant Nonlinearities of Macro-Fiber Composite Cantilevers in Energy Harvesting,” Proceedings of the 10
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, 18-20 September 2017. - Sugino, C., Guillot, V., and Erturk, A., 2017, “Multifunctional Energy Harvesting Locally Resonant Metastructures,” Proceedings of the 10
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, 18-20 September 2017. - Tan, D., Yavarow, P., and Erturk, A., 2017, “Nonlinear Structural Dynamics of Macro-Fiber Composite Cantilevers for Resonant Actuation,” Proceedings of the 10
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, 18-20 September 2017. - Tol, S., Degertekin, F.L., and Erturk, A., 2017, “Low-Frequency Elastic Wave Focusing and Harvesting via Locally Resonant Metamaterials,” Proceedings of the 10
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, 18-20 September 2017. - Tan, D. and Erturk, A., 2017, “On the Origin of the Nonclassical Softening Nonlinearity in MEMS/NEMS Cantilevers,” Proceedings of the ASME 2017 IDETC 29
^{th}Biennial Conference on Mechanical Vibration and Noise, Cleveland, OH, 6-9 August 2017 (**Best Student Paper Award – 1st place**). - Sugino, C., Ruzzene, M., and Erturk, A., 2017, “Merging Mechanical and Electromechanical Locally Resonant Bandgaps in Metamaterials,” Proceedings of the 8
^{th}ECCOMAS Thematic Conference on Smart Structures and Materials, Madrid, Spain, 5-8 June 2017. - Kathpalia, B., Tan, D., Stern, I., and Erturk, A., 2017, “Modeling and Characterization of a Curved Piezoelectric Energy Harvester for Smart Paver Tiles,” Proceedings of the 7
^{th}International Conference on Sustainable Energy Information Technology, Madeira, Portugal, 16-19 May 2017. - Tol, S., Degertekin, F.L., and Erturk, A., 2017, “3D-Printed Lens for Structure-Borne Wave Focusing and Energy Harvesting,” Proceedings of the 24
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Portland, OR, 25-29 March 2017. - Moura, A. and Erturk, A., 2017, “Size Effects in Piezoelectric Cantilevers at Submicron Thickness Levels due to Flexoelectricity,” Proceedings of the 24
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Portland, OR, 25-29 March 2017. - Tol, S., Degertekin, F.L., and Erturk, A., 2017, “Omnidirectional Lens for Structure-borne Wave Focusing and Energy Harvesting,” Proceedings of the 24
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Portland, OR, 25-29 March 2017. - Sugino, C., Leadenham, S., Ruzzene, M., and Erturk, A., 2017, “Piezoelectric Metamaterials with Synthetic Impedance Shunts,” Proceedings of the 24
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Portland, OR, 25-29 March 2017. - Schwartz, F.J., Skow, E.A., Erturk, A., and Cunefare, K.A., 2017, “Energy Harvesting from Acoustic Fields for Self-Powered Sensors in Pumped Fluid Systems,” Proceedings of the 24
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Portland, OR, 25-29 March 2017. - Schmied, J., Sugino, C., Bergamini, A., Ermanni, P., and Ruzzene, M., and Erturk, A., 2017, “Toward Structurally-Integrated Locally Resonant Metamaterials for Vibration Attenuation,” Proceedings of the 24
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Portland, OR, 25-29 March 2017. - Kathpalia, B., Stern, I., and Erturk, A., 2017, “Evaluation of Human-Scale Motion Energy Harvesting for Wearable Electronics,” Proceedings of the 24
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Portland, OR, 25-29 March 2017. - Tol, S., Vora, F., Degertekin, F.L., and Erturk, A., 2016, “Embedded Elastic Wave Mirrors for Enhanced Energy Harvesting,” IEEE Sensors 2016, Orlando, FL, 30 October – 2 November 2016.
- Tol, S., Degertekin, F.L., and Erturk, A., 2016, “Elastic Wave Focusing Concepts for Dramatically Enhanced Piezoelectric Energy Harvesting,” Proceedings of the 27
^{th}International Conference on Adaptive Structures and Technologies, Lake George, NY, 3-5 October 2016. - Sugino, C., Leadenham, S., Ruzzene, M., and Erturk, A., 2016, “Electroelastic Bandgap Formation in Locally Resonant Metamaterial Beams with Piezoelectric Shunts: A Modal Analysis Approach,” Proceedings of the 9
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stowe, VT, 28-30 September 2016. - Tol, S., Degertekin, F.L., and Erturk, A., 2016, “Dramatic Enhancement of Elastic Wave Energy Harvesting Using a Gradient-Index Phononic Crystal Lens,” Proceedings of the 9
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stowe, VT, 28-30 September 2016 (**Best Student Paper Award**– Energy Harvesting Symposium). - De Marqui, Jr., C., Tan, D., and Erturk, A., 2016, “On the Optimal Piezoelectric Material Distribution in Energy Harvesting from a Nonlinear Beam Under Axial Flow,” Proceedings of the 9
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stowe, VT, 28-30 September 2016. - Moura, A.G. and Erturk, A., 2016, “A Distributed-Parameter Flexoelectric Energy Harvester Model Accounting for Two-Way Coupling and Size Effects,” Proceedings of the 9
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stowe, VT, 28-30 September 2016. - Sugino, C., Leadenham, S., Ruzzene, M., and Erturk, A., 2016, “Modal Analysis of Bandgap Formation for Vibration Attenuation in Locally Resonant Finite Beams,” Proceedings of the ASME 2016 IDETC 28
^{th}Biennial Conference on Mechanical Vibration and Noise, Charlotte, NC, 22-24 August 2016 (**Best Student Paper Award – 2nd place**). - Silva, T., Tan, D., De Marqui, Jr., C., and Erturk, A., 2016, “Suppression of Nonlinear Bifurcations in Flexible Structures Using Nonlinear Switching Shunt Damping Circuits,” Proceedings of the ASME 2016 IDETC 28
^{th}Biennial Conference on Mechanical Vibration and Noise, Charlotte, NC, 22-24 August 2016. - Tan, D., Sugino, C., Leadenham, S., and Erturk, A., 2016, “Dramatic Effect of Fluid Damping on the Performance of a Nonlinear M-Shaped Broadband Energy Harvester,” Proceedings of the 23
^{rd}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Las Vegas, NV, 20-24 March 2016. - Tan, D. and Erturk, A., 2016, “In Vacuo Elastodynamics of a Flexible Cantilever for Wideband Energy Harvesting,” Proceedings of the 23
^{rd}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Las Vegas, NV, 20-24 March 2016. - Mrlik, M., Leadenham, S., AlMaaded, M.A., and Erturk, A., 2016, “Figure of Merit Comparison of PP-based Electret and PVDF-based Piezoelectric Polymer Energy Harvesters” Proceedings of the 23
^{rd}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Las Vegas, NV, 20-24 March 2016. - Skow, E.A., Cunefare, K.A., and Erturk, A., 2016, “Power Conditioning for Low-Voltage Piezoelectric Stack Energy Harvesters,” Proceedings of the 23
^{rd}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Las Vegas, NV, 20-24 March 2016. - Leadenham, S., Moura, A., and Erturk, A., 2016, “Exploiting Material Softening in Hard PZTs for Resonant Bandwidth Enhancement” Proceedings of the 23
^{rd}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Las Vegas, NV, 20-24 March 2016. - Aghakhani, A., Basdogan, I., and Erturk, A., 2016, “Multiple Piezo-Patch Energy Harvesters Integrated to a Thin Plate with AC-DC Conversion: Analytical Modeling and Numerical Validation,” Proceedings of the 23
^{rd}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Las Vegas, NV, 20-24 March 2016. - Cao, D. X., Leadenham, S., and Erturk, A., 2015, “Nonlinear Two-to-One Internal Resonance for Broadband Energy Harvesting,” Proceedings of the 8
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Colorado Springs, CO, 21-23 September 2015. - Shahab, S., Tan, D., and Erturk, A., 2015, “Hydrodynamic Thrust Generation and Power Consumption Investigations of Piezoelectric Fins with Different Aspect Rations,” Proceedings of the 8
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Colorado Springs, CO, 21-23 September 2015. - Bayik, A., Aghakhani, A., Basdogan, I., and Erturk, A., 2016, “Equivalent Circuit Modeling of Patch-based Piezoelectric Energy Harvesting on Plate-like Structures with AC-DC Conversion,” Proceedings of the 8
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Colorado Springs, CO, 21-23 September 2015. - Leadenham, S. and Erturk, A., 2015, “Harmonic Balance Analysis and Experimental Validation of a Nonlinear Broadband Piezoelectric Energy Harvester for Low Ambient Vibrations,” Proceedings of the ASME 2015 IDETC 27
^{th}Biennial Conference on Mechanical Vibration and Noise, Boston, MA, 2-5 August 2015 (**Best Student Paper Award – 3rd place**). - Shahab, S. and Erturk, A., 2015, “Experimentally Validated Nonlinear Electrohydroelastic Euler-Bernoulli-Morison Model for Macro-Fiber Composites with Different Aspect Ratios,” Proceedings of the ASME 2015 IDETC 27
^{th}Biennial Conference on Mechanical Vibration and Noise, Boston, MA, 2-5 August 2015 (**Best Student Paper Award – 2nd place**). - Skow, E., Koontz, Z., Cunefare, K.A., and Erturk, A., 2015, “Hydraulic Pressure Energy Harvester Enhanced by Helmholtz Resonator,” Proceedings of the 22
^{nd}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 8-12 March 2015. - Shahab, S., Gray, M., and Erturk, A., 2015, “An Experimentally Validated Contactless Acoustic Energy Transfer Model with Resistive-Reactive Electrical Loading,” Proceedings of the 22
^{nd}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 8-12 March 2015. - Leadenham, M., Ferri, B., and Erturk, A., 2015, “Modeling and Identification of Nonlinear Electroelastic and Dissipative Parameters for PZT-5A and PZT-5H Bimorphs: A Dynamical Systems Approach,” Proceedings of the 22
^{nd}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 8-12 March 2015. - Carrara, M., Kulpe, J., Leadenham, S., Leamy, M.J., and Erturk, A., 2015, “Broadband Performance of a Patterned Piezoelectric Energy Harvester Integrated with a Continuous Elastoacoustic Mirror,” Proceedings of the 22
^{nd}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 8-12 March 2015. - Shahab, S. and Erturk, A., 2015, “Unified Electrohydroelastic Investigation of Underwater Energy Harvesting and Dynamic Actuation by Incorporating Morison’s Equation,” Proceedings of the 22
^{nd}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 8-12 March 2015. - Darabi, A., Leamy, M.J., and Erturk, A., 2015, “Bimorph Disk Piezoelectric Energy Harvester Under Base Excitation: Electroelastic Modeling and Experimental Validation,” Proceedings of the 22
^{nd}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 8-12 March 2015. - Skow, E.A., Cunefare, K.A., and Erturk, A., 2014, “Design and Modeling of Hydraulic Piezoelectric Energy Harvesters for Low Dynamic Pressure Environments,” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Montreal, Canada, 14-20 November 2014.
- Leadenham, S. and Erturk, A., 2014, “Modeling and Characterization of Elastic, Coupling, and Dissipative Nonlinearities in PZT Bimorphs for Vibration Energy Harvesting,” Proceedings of the ASME Dynamic Systems and Control Conference, San Antonio, TX, 22-24 October 2014.
- Shahab, S. and Erturk, A., 2014, “Underwater Dynamic Actuation of Macro-Fiber Composite Flaps with Different Aspect Ratios: Electroelastic Modeling, Testing, and Characterization,” Proceedings of the 7
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Newport, RI, 8-10 September 2014. - Leadenham, S. and Erturk, A., 2014, “Nonlinear Dissipative Electroelastic Dynamics of an M-Shaped Broadband Piezoelectric Energy Harvester,” Proceedings of the 7
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Newport, RI, 8-10 September 2014. - Shahab, S. and Erturk, A., 2014, “Contactless Ultrasonic Energy Transfer: Acoustic-Piezoelectric Structure Interaction Modeling and Performance Enhancement,” Proceedings of the ASME 2014 IDETC 26
^{th}Biennial Conference on Mechanical Vibration and Noise, Buffalo, NY, 17-20 August 2014. - Leadenham, S. and
^{st}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 9-13 March 2014. - Leadenham, S. and
^{st}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 9-13 March 2014. - Shahab, S., Leadenham, S., Guillot, F., Sabra, K.G. and Erturk, A., 2014, “Ultrasound Acoustic Wave Energy Transfer and Harvesting,” Proceedings of the 21
^{st}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 9-13 March 2014. - Shahab, S. and Erturk, A., 2014, “Electrohydroelastic Dynamics of Macro-Fiber Composites for Underwater Energy Harvesting from Base Excitation,” Proceedings of the 21
^{st}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 9-13 March 2014. - Aridogan, U., Basdogan, I., and
^{st}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 9-13 March 2014. - Tol, S., Degertekin, F.L., and
^{st}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 9-13 March 2014. - Carrara, M., Kulpe, J., Leadenham, S., Leamy, M.J., and Erturk, A., 2014, “Optimal Piezoelectric Energy Harvesting Using Elastoacoustic Mirrors by Frequency-Wavenumber Domain Investigation,” Proceedings of the 21
^{st}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 9-13 March 2014. - Tol, S., Degertekin, F.L., and Erturk, A., 2013, “Harvesting of Bending Waves in One-Dimensional Infinite Beams Using Resistive-Reactive Circuits,” Proceedings of the 6
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, 16-18 September 2013. - Skow, E.A., Cunefare, K.A., and Erturk, A., 2013, “Power Density Performance Improvements for High Pressure Ripple Energy Harvesting,” Proceedings of the 6
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, 16-18 September 2013. - Aridogan, U., Basdogan, I., and Erturk, A., “Multiple Patch-Based Piezoelectric Energy Harvesting from Multiple Vibration Modes of Thin Plates,” Proceedings of the 6
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, 16-18 September 2013. - Leadenham, S. and Erturk, A., 2013, “An M-shaped Asymmetric Nonlinear Oscillator for Broadband Energy Harvesting,” Proceedings of the ASME 2013 IDETC 25
^{th}Biennial Conference on Mechanical Vibration and Noise, Portland, OR, 4-7 August 2013. - Jain, P.B., Cacan, M.R., Leadenham, S., De Marqui, Jr. C., and Erturk, A., 2013, “An Experimental Investigation into the Performance of a T-shaped Piezoelectric Flow Energy Harvester,” Proceedings of the ASME 2013 IDETC 25
^{th}Biennial Conference on Mechanical Vibration and Noise, Portland, OR, 4-7 August 2013. - Aridogan, U., Basdogan, I., and Erturk, A., 2013, “Electroelastic finite-element modeling and experimental validation of structurally-integrated piezoelectric energy harvesters,” Proceedings of the ASME 2013 IDETC 25
^{th}Biennial Conference on Mechanical Vibration and Noise, Portland, OR, 4-7 August 2013. - Skow, E.A., Cunefare, K.A., and Erturk, A., 2013, “Transduction as Energy Conversion; Harvesting of Acoustic Energy in Hydraulic Systems,” Proceedings of the 21
^{st}International Congress on Acoustics, Montreal, Canada, 2-7 June 2013. - Zhao, S. and Erturk, A., 2013, “Numerical and Experimental Comparison of Bistable and Monostable Vibration Energy Harvesters Under Broadband Random Excitation,” Proceedings of the 54
^{th}AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Boston, MA, 8-11 April 2013. - Dias, J.A.C., De Marqui, Jr., C., and Erturk, A., 2013, “Dimensionless Analysis and Scaling of a Hybrid 3-DOF Airfoil-Based Piezoelectric-Inductive Aeroelastic Energy Harvester,” Proceedings of the 54
^{th}AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Boston, MA, 8-11 April 2013. - Samur, A. and Erturk, A., 2013, “Multifunctional Double-Bimorph Piezoelectric Composite for Bending-Twisting Actuation, Active Stiffness Change, and Energy Harvesting,” Proceedings of the 54
^{th}AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Boston, MA, 8-11 April 2013. - Zhao, S. and Erturk, A., 2013, “Energy Harvesting from Harmonic and Noise Excitation of Multilayer Piezoelectric Stacks: Modeling and Experiment,” Proceedings of the 20
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 10-14 March 2013. - Skow, E.A., Cunefare, K.A., and Erturk, A., 2013, “Design and Performance Enhancement of Hydraulic Piezoelectric Energy Harvesting Systems,” Proceedings of the 20
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 10-14 March 2013. - Dias, J.A.C., De Marqui, Jr., C., and Erturk, A., 2013, “Electroelastic Modeling and Analysis of a Hybrid Piezoelectric-Inductive Flow Energy Harvester,” Proceedings of the 20
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 10-14 March 2013. - Cen, L., Cacan, M.R., and Erturk, A., 2012, “Piezohydroelastic Investigation of Underwater Thrust Generation for Bio-inspired Robotic Applications,” Proceedings of the 23
^{rd}International Conference on Adaptive Structures and Technologies, Nanjing, China, 11-13 October 2012. - Zhao, S. and Erturk, A., 2012, “Electroelastic Modeling and Experimental Validation of Piezoelectric Energy Harvesting from Broadband Random Vibrations,” Proceedings of the 5
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stone Mountain, GA, 19-21 September 2012 (**Best Student Paper Award – 1st place**). - Cen, L. and Erturk, A., 2012, “Fish-like Self Propulsion Using Flexible Piezoelectric Composites,” Proceedings of the 5
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stone Mountain, GA, 19-21 September 2012. - Cacan, M.R. and Erturk, A., 2012, “Comparative Investigation of the Electroelastic Dynamics of Piezoceramics with Interdigitated and Uniform Electrodes,” Proceedings of the 5
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stone Mountain, GA, 19-21 September 2012. - Samur, A. and Erturk, A., 2012, “Two Architectures for Bending-Twisting Flapping Using Macro-Fiber Composites,” Proceedings of the 5
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stone Mountain, GA, 19-21 September 2012. - Carrara, M., Cacan, M.R., Toussaint, J., Leamy, M.J., Ruzzene, M., and Erturk, A., 2012, “Metamaterial Concepts for Structure-borne Wave Energy Harvesting: Wave Focusing, Funneling, and Localization,” Proceedings of the 5
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stone Mountain, GA, 19-21 September 2012. - Cunefare, K.A., Erturk, A., Savor, J., Verma, N., Skow, E.A., and Cacan, M.R., 2012, “Energy Harvesting from Hydraulic Pressure Fluctuations,” Proceedings of the 5
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stone Mountain, GA, 19-21 September 2012. - Zhao, S. and Erturk, A., 2012, “Energy Harvesting from Broadband Random Vibrations: Comparison of Single-Mode and Multi-Mode Electroelastic Solutions,” Proceedings of the ASME 2012 IDETC 24
^{th}Biennial Conference on Mechanical Vibration and Noise, Chicago, IL, 12-15 August 2012. - Erturk, A. and Delporte, G., 2011, “Hydroelastic Power and Thrust Generation Using Macro-Fiber Composite Piezoelectrics,” Proceedings of the 4
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems,” Scottsdale, AZ, 18-21 September 2011. - Anicézio, M.,Erturk, A., De Marqui, Jr., C., and Inman, D.J., 2011, “Linear and Nonlinear Aeroelastic Energy Harvesting Using Electromagnetic Induction,” Proceedings of the 4
^{th}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Scottsdale, AZ, 18-21 September 2011. - Erturk, A. and Inman, D.J., 2011, “Energy Harvesting for Wireless Applications,” Proceedings of the 14
^{th}International Symposium on Dynamic Problems of Mechanics, Sao Sebastiao, SP, Brazil, 13-18 March 2011 (**keynote address**). - Anicézio, M., De Marqui, Jr., C., Erturk, A., and Inman, D.J., 2011, “Nonlinear Modeling and Analysis of a Piezoaeroelastic Energy Harvester,” Proceedings of the 14
^{th}International Symposium on Dynamic Problems of Mechanics, Sao Sebastiao, SP, Brazil, 13-18 March 2011. - Erturk, A. and Inman, D.J., 2011, “Piezoelectric Power Generation for Civil Infrastructure Systems,” Proceedings of the 18
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 6-10 March 2011. - Erturk, A., Lee, H.Y., and Inman, D.J., 2010, “Investigation of Soft and Hard Ceramics and Single Crystals for Resonant and Off-resonant Piezoelectric Energy Harvesting,” Proceedings of the 3
^{rd}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Philadelphia, PA, 28 September – 1 October 2010. - Arrieta, A.F., Erturk, A., Hagedorn, P., and Inman, D.J., 2010, “Electromechanical Modeling and Experiments of a Bistable Plate for Nonlinear Energy Harvesting,” Proceedings of the 3
^{rd}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Philadelphia, PA, 28 September – 1 October 2010. - Stanton, S.C., Erturk, A., Mann, B.P., and Inman, D.J., 2010, “On the Manifestation and Influence of Material Nonlinearity in Electroelastic Power Generators,” Proceedings of the 3
^{rd}ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Philadelphia, PA, 28 September – 1 October 2010 (**Best Student Paper Award – 1st place**). - Erturk, A. and Inman, D.J., 2010, “Assumed-modes Formulation of Piezoelectric Energy Harvesters: Euler-Bernoulli, Rayleigh and Timoshenko Models with Axial Deformations,” Proceedings of the ASME 2010 ESDA 10
^{th}Biennial Conference on Engineering Systems, Design and Analysis, Istanbul, Turkey, 12-14 July 2010. - Vieira, W.G.R., De Marqui, Jr., C., Erturk, A., and Inman, D.J., 2010, “Frequency Domain Piezoaeroelastic Analysis and Optimization of an Energy Harvester Wing,” Proceedings of the 51
^{th}AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, FL, 12-15 April 2010. - Gambier, P., Anton, S.R., Kong, N., Erturk, A., and Inman, D.J., 2010, “Combined Piezoelectric, Solar and Thermal Energy Harvesting for Multifunctional Structures with Thin-film Batteries,” Proceedings of the 21
^{st}International Conference on Adaptive Structures and Technologies, State College, PA, 4-6 October 2010. - Arrieta, A.F., Hagedorn, P.,Erturk, A., and Inman, D.J., 2010, “Dynamics and Morphing of a Bistable Plate,” Proceedings of the 21
^{st}International Conference on Adaptive Structures and Technologies, State College, PA, 4-6 October 2010. - Erturk, A., Vieira, W.G.R., De Marqui, Jr., C., and Inman, D.J., 2010, “Piezoelectric Energy Harvesting from Flow Excitation: Modeling and Experiment,” Proceedings of the 17
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 7-11 March 2010. - Anton, S.R., Erturk, A., and Inman, D.J., 2010, “Strength Analysis of Piezoceramic Materials for Structural Considerations in Energy Harvesting for UAVs,” Proceedings of the 17
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 7-11 March 2010. - Erturk, A., Hoffmann, J., and Inman, D.J., 2010, “Limit Cycle Oscillations of a Nonlinear Piezomagnetoelastic Structure for Broadband Vibration Energy Harvesting,” Proceedings of the 28
^{th }International Modal Analysis Conference, Jacksonville, FL, 1-4 February 2010. - De Marqui, Jr., C., Vieira, W.G.R.,Erturk, A., and Inman, D.J, 2010, “Frequency Domain Solution of a Piezoaeroelastic Wing for Energy Harvesting,” Proceedings of the 28
^{th }International Modal Analysis Conference, Jacksonville, FL, 1-4 February 2010. - Anton, S.R., Erturk, A., Kong, N., Ha, D.S., and Inman, D.J., 2009, “Self-Charging Structures Using Piezoceramics and Thin-Film Batteries,” Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Oxnard, CA, 20-24 September 2009 (
**Best Student Paper Award – 1st place**). - De Marqui, Jr., C.,Erturk, A., and Inman, D.J., 2009, “Effect of Segmented Electrodes on Piezoelastic and Piezoaeroelastic Responses of Generator Plates,” Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Oxnard, CA, 20-24 September 2009.
- Erturk, A., Anton, S.R., Bilgen, O.,and Inman, D.J., 2009, “Effect of Material Constants and Mechanical Damping on Piezoelectric Power Generation,” Proceedings of the ASME 2009 IDETC 22
^{nd}Biennial Conference on Mechanical Vibration and Noise, San Diego, CA, 30 August – 2 September 2009. - De Marqui, Jr., C.,Erturk, A., and Inman, D.J., 2009, “Piezoaeroelastically Coupled Modeling and Analysis of Electrical Power Generation and Shunt Damping for a Cantilever Plate,” Proceedings of the 17
^{th}International Conference on Composite Materials, Edinburgh, UK, 27-31 July 2009. - Anton, S.R., Erturk, A., and Inman, D.J., 2009, “An Investigation on Multifunctional Piezoelectric Composite Spars for Energy Harvesting in Unmanned Aerial Vehicles,” Proceedings of the 17
^{th}International Conference on Composite Materials, Edinburgh, UK, 27-31 July 2009. - De Marqui, Jr., C.,Erturk, A., and Inman, D.J., 2009, “Finite Element Analysis of a UAV Wing Spar with Piezoceramics for Vibration Energy Harvesting,” Proceedings of the 50
^{th}AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, 4-7 May 2009. - Erturk, A., Anton, S.R., and Inman, D.J., 2009, “Piezoelectric Energy Harvesting from Multifunctional Wing Spars for UAVs – Part 1: Coupled Modeling and Preliminary Analysis,” Proceedings of the 16
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 8-12 March 2009. - Anton, S.R., Erturk, A., and Inman, D.J., 2009, “Piezoelectric Energy Harvesting from Multifunctional Wing Spars for UAVs – Part 2: Experiments and Storage Applications,” Proceedings of the 16
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 8-12 March 2009. - Erturk, A. and Inman, D.J., 2009, “Parameter Identification and Optimization for Cantilevered Piezoelectric Energy Harvesters Based on the Coupled Distributed Parameter Solution,” Proceedings of the 27
^{th }International Modal Analysis Conference, Orlando, FL, 9-12 February 2009. - Inman, D.J.,Erturk, A., and Bilgen, O., 2008, “Morphing, Monitoring and Harvesting Using Smart Materials, Proceedings of the 12
^{th}International Conference on Mechanical Engineering, Bratislava, Slovakia, 13-14 November 2008. - Erturk, A., Bilgen, O., Fontenille, M., and Inman, D.J., 2008, “Piezoelectric Energy Harvesting from Macro-Fiber Composites with an Application to Morphing Wing Aircraft, Proceedings on the 19
^{th}International Conference of Adaptive Structures and Technologies, Monte Verità, Ascona, Switzerland, 6-9 October 2008. - Bilgen, O., Erturk, A., Inman, D.J., and Kochersberger K.B., 2008, “Macro-Fiber Composite Actuated Thin Clamped-Free Benders and Thin Simply-Supported Morphing Airfoils, Proceedings of the 19
^{th}International Conference on Adaptive Structures and Technologies, Monte Verità, Ascona, Switzerland, 6-9 October 2008. - Erturk, A.and Inman, D.J., 2008, “Piezoelectric Shunt Damping for Chatter Suppression in Machining Processes,” Proceedings of the ISMA2008 International Conference on Noise and Vibration Engineering, Leuven, Belgium, 15-17 September 2008.
- Erturk, A. and Inman, D.J., 2008, “Analytical Modeling of Cantilevered Piezoelectric Energy Harvesters for Transverse and Longitudinal Base Motions,” Proceedings of the 49
^{th}AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, 7-10 April 2008. - Erturk, A., Renno, J.M., and Inman, D.J., 2008, “Energy Harvesting from a Piezoelectric Bender through Rigid Body Motion of a Two-Link Manipulator,” Proceedings of the 49
^{th}AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, 7-10 April 2008. - Erturk, A., Renno, J.M., and Inman, D.J., 2008, “Piezoelectric Energy Harvesting from an L-Shaped Beam-Mass Structure, Proceedings of the 15
^{th}SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 9-13 March 2008. - Anton, S.R., Erturk, A., and Inman, D.J., 2008, “Energy Harvesting from Small Unmanned Air Vehicles, Proceedings of the 17
^{th}International Symposium on Application of Ferroelectrics, Santa Fe, NM, 24-27 February 2008. - Erturk, A., Anton, S.R., and Inman, D.J., 2007, “Energy Harvesting from Rigid Body Motions, Proceedings of the 18
^{th}International Conference on Adaptive Structures and Technologies, Ottawa, Ontario, Canada, 3-5 October 2007. - Erturk, A.and Inman, D.J., 2007, “Mechanical Considerations for Modeling of Vibration-Based Energy Harvesters,” Proceedings of the ASME 2007 IDETC 21
^{st}Biennial Conference on Mechanical Vibration and Noise, Las Vegas, NV, 4-7 September 2007. - Inman, D.J. and Erturk, A.
**,**2007, “Energy Harvesting Using Smart Materials, Proceedings of the 3^{rd}ECCOMAS Thematic Conference on Smart Structures and Materials, Gdansk, Poland, 9-11 July 2007. - Erturk, A., Budak, E., and Ozguven, H.N., 2006, “Selection of Design and Operational Parameters in Spindle-Holder-Tool Assemblies for Maximum Chatter Stability by Using a New Analytical Model,” Proceedings of the 2
^{nd}CIRP Conference on High Performance Cutting, Vancouver, BC Canada, 12-13 June 2006.